Node One compatibility

Does Node One work with your reef?

Use this list to check the equipment and ecosystems Node One currently supports, what is being validated, and what we are actively researching. Compatibility is often model-specific, so if your exact device is important to your purchase, ask us before ordering.

Updated November 9, 2026

This list is growing.

We are actively working on more integrations. If you do not see your manufacturer or exact model here, write to us and tell us what you have. We will check the current integration work and tell you where it stands before you buy.

Ask About Your Device

How Node One approaches control

Check your model below for readings and controls available on the Node One screen. Plugs and switches without a power meter are monitor only. Use the maker's app to switch them. Controller outlets such as Apex and HYDROS can confirm switching through the controller.

Check the connection before you buy

The connection column shows how the listed integration reaches your equipment or its gateway. Only applies to that route, not every radio built into the product. By model or By device means the icons are alternatives across the range, not a promise that each device offers every connection. Network means an IP connection; the exact Wi-Fi or wired option depends on the equipment. Cloud routes require internet and the owner's account.

Bluetooth-only equipment needs Bluetooth coverage near the tank. A compatible nearby Bluetooth adapter may be enough. An ESP32 Bluetooth proxy can extend coverage for supported integrations; it is not automatically required for every Bluetooth device. Active connections and proxy compatibility depend on the integration. Ask us about your device and tank location before buying an extender.

Bluetooth used only during phone pairing is not shown as an everyday connection. Matter over Thread needs a Thread border router; Node One includes the USB Zigbee dongle that makes it a Zigbee network hub. A gateway's Wi-Fi connection does not turn its attached equipment into Wi-Fi devices.

Model by model

Does it work with my gear?

471 model and product-family entries from 70 brands, with verification status shown for each. Search for your exact model, or open any brand. The tables below go into more detail on each brand's route.

Proven: physically verified on a Node One. Proven by an owner identifies equipment verified working on a customer's Node ONE.

Preview: software is published in the Node ONE development update channel and checked against software contracts. Exact model, connection and feature limits apply; this status does not claim physical verification.

Expected: the maker or the integration's author lists this model. We have not yet verified it ourselves.

In development: research or staged implementation exists, but the described route is not in the published Node ONE update.

Not yet: no released Node ONE route is established for this model. A compatible metering plug may separately switch power to the device and report its power draw.

Not listed? Tell us the exact model and we will look into it.

Installed aquarium integrations

Current aquarium equipment coverage

These routes are available in the published Node ONE development update. Supported and Model-specific describe software coverage; Proven in the model lookup identifies physical verification. Read the limits for each model, firmware and connection before ordering.

Manufacturer / Ecosystem	Status	Connection	Equipment Currently Covered	Buyer Guidance
CoralVue HYDROS	Supported	Account route Cloud Internet required	Verified HYDROS BORG readings include temperature, pH, salinity, ORP, return-pump flow and XP8 power, plus reported pump and skimmer states. HYDROS-branded dosing pumps manufactured by Kamoer are verified working on a customer's Node ONE, with dosing information visible (October 8, 2026).	Customer verification covers monitoring and the installed HYDROS-branded Kamoer dosing displays; exact pump models remain unconfirmed. A separate released official-API preview adds the controls advertised by each device with owner-specific provider and Write device access. These writes have software checks and are not covered by the monitoring verification.
Neptune Systems / Apex	Supported	By model Network Local network / account	Verified Apex/Trident monitoring remains available. The separate released original adapter adds local probes, module health, reported outputs, available Trident results and reading-log history; authenticated outlet Auto/On/Off and feed A-D.	The physical verification covers monitoring. Original-adapter controls require the owner's Apex local login and have software-contract checks. Trident test-start, dosing and variable-speed programming are not offered. Other accessory behavior remains model-specific.
Red Sea / ReefBeat	Supported	By model Wi-FiCloud Local Wi-Fi; ReefWave via cloud	ReefLED 50/60/90/115/160/170; ReefDose 2/4; ReefMat 250/500/1200; ReefATO+; ReefWave 25/45; ReefRun; supported skimmer families; ReefControl Pro and Lite; ReefPower 6 and 8.	ReefLED 170, ReefControl Lite and ReefPower 8 are listed by the integration's author and have not been tested. ReefWave runs through Red Sea's cloud account, so it needs internet. Check unusual models or firmware with us before ordering.
Jebao / Jecod	Model-specific	Network Network Local / account routes	Local Wi-Fi Jebao Aqua equipment, including the MDC pumps.	The integration lists 48 device profiles, which is a count of profiles, not of tested models. Retail models confirmed so far: MLW20, ALW20, GDP-5500, GMP-40 and MDC-5000. Twelve Bluetooth-only Jebao families cannot be reached today. Ask us about your exact model before ordering.
Aqua Medic	Model-specific	By model CloudNetwork Cloud account; local route on x.3	EcoDrift and SmartDrift x.1 and x.3; DC Runner return and skimmer pumps.	This route uses an Aqua Medic account and internet. The DC Runner x.3 also has a local Wi-Fi route. Reefdoser EVO, T-Controller Twin and the Aquarius and Spectrus lights have no route yet.
Reef Kinetics	Supported	Account route Cloud Internet required	ReefBot V2 and ReefBot Lab.	Existing community V2/Lab support remains model-specific. The new original full-feature ReefBot/Pro/Lab implementation is staged, not released; that research and code do not add a public Pro or Doser support claim.
GHL	Model-specific	Network Network Local controller connection	Released GHL API monitoring preview for ProfiLux 4 and 4.1 and Mitras LX7 and LX8.	Set points, lighting and aquarium controls are not on the Node One screen yet. The GHL API does not switch outlets. No physical verification. Check exact firmware and standalone Mitras compatibility.
Reef Factory	Model-specific	Network Network Local / account routes	Local routes cover Smart Roller, Smart Level Keeper, KH Keeper and the single-head doser. A released Smart Reef account preview reads multi-head dosers, KH and meters.	The Smart Reef account preview sends no commands and has no physical verification. See the model lookup for the limits of each local route.
Focustronic	Released monitoring preview	Account route Cloud Internet required	Original and Professional Alkatronic; original and Essential Mastertronic. Modern account and legacy portal routes; readings follow each model and parameter.	Sign-in and device-selection repairs are released. Monitoring only; no test start, schedules or dosing controls. Software checks use fixture replies; real owner-account verification remains pending. Dosetronic, Powertronic, Solartronic and Tracetronic are in development.
AquaWiz	Monitoring preview	By route Wi-Fi / Cloud Local address; cloud preview needs internet	Released official monitoring preview: local KH and sample pH, trends, owner-entered supply tracking and last-observed dosing phase; official cloud readings are also implemented.	Local firmware and device-Wi-Fi/home-network reachability still need physical verification. Cloud guest checks do not verify your unit. No dosing controls, automatic bottle subtraction or claim that a reported dose was physically delivered.
Kamoer: X1, legacy X4/F4 and Mini K	Released software preview	By model Bluetooth / Wi-Fi X1 and Mini K: Bluetooth. Legacy X4/F4: local Wi-Fi.	Released monitoring previews for the original X1, legacy X4 and F4 families, and Mini K. Mini K reports pump mode and its 12 schedule slots.	Dosing controls are not on the Node One screen yet. No physical verification. These routes do not cover X1 PRO, X1 PRO-T, F1, F4 PRO, X4 PRO or the wider Kamoer Remote range.
Reef Angel	Monitoring preview	Network Network Local controller address	Controllers exposing local /sa readings: pH, three temperatures and reported outlet states.	Monitoring only. Reported outlet states do not imply outlet control.
ReefBreeders	Monitoring preview	Account route Cloud Internet required	Owner-account cloud connectivity and schedule status.	Exact light models remain unconfirmed. Account/API access requirements must be checked for your setup.
OASE	Released software preview	Local gateway, Bluetooth for Classic C, or separate cloud account	OASE Control gateway preview covers model-specific readings for StreamMax, lighting, pumps and filters. FM-Master Cloud is separate. The OASE Switch Bluetooth preview reads AquaMax Eco Classic C 9000, 12000 and 18000.	Gateway coverage depends on the article and firmware. Check the model lookup for available controls. Classic C pump controls are not on the Node One screen yet. LunAqua Connect, EARTH and legacy WLAN are unsupported. No physical verification.
ATI	Released software preview	Only Wi-Fi Local Wi-Fi route	Straton, Straton Pro and Straton Flex, including G2, report board temperature, history, estimated watts and estimated PAR. LED Powermodule Wi-Fi reports programs and readings.	PAR is calculated. Straton power and identify, and Powermodule program and service controls, are not on the Node One screen yet. Connecting to Straton can turn it on and sign out another app. No physical verification.
Borneo	Local preview	Only Wi-Fi Local Wi-Fi route	Lyfi aquarium lighting through the local preview.	Preview coverage applies to Lyfi. Detailed light programming remains in the manufacturer's app.
Aqua Illumination (AI)	Model-specific	By model BluetoothWi-Fi Bluetooth route / Wi-Fi route	Compatible Bluetooth models support on/off, intensity and lighting schedules. The local myAI Wi-Fi route reads channel levels.	Check the exact model and route below. Blade Coral Grow and Prime 16 HD have verification on Node One. Light controls and schedules are not on the Node One screen for the myAI Wi-Fi route yet.
Maxspect	Model-specific	Network Network Local Syna-G / Jump route	Compatible Syna-G and Jump aquarium lights.	This lighting route does not establish Gyre or pump support.
EcoTech / Mobius	Model-specific	Only Bluetooth Current BLE route	Compatible Mobius lights support on/off, intensity and lighting schedules over Bluetooth. Radion XR15 G6 Blue is verified on Node One.	VorTech MP10 speed and estimated flow are owner verified. VorTech, Vectra and Nero pump readings depend on the model. Pump support is monitoring only.
Juwel	Supported	Network Network SmartControl local address	HeliaLux SmartControl.	Coverage applies specifically to the HeliaLux SmartControl family.
Chihiros	Development preview	Only Bluetooth Current BLE route	Released Bluetooth lighting preview for supported names including A Series, New C, RGB+APLUS, RGB VIVID and VIVID II, WRGB II, SEA_LED, Commander 4 and X, and X300.	Shows the last channel levels and mode sent. Off, restore and level controls are not on the Node One screen yet. Check the exact Bluetooth name. AIX radios and dosing pumps are unsupported. No physical verification.
AIPAI / Doseen	Model-specific	Only Wi-Fi Local Wi-Fi route	A8, A7 and A46/A180 light families.	Coverage applies to the named families. Detailed spectrum programming remains in the manufacturer's app.
EHEIM	Released software preview	Via main device Network Local EHEIM Digital network	Released EHEIM Digital preview covers model-specific readings for lights, filters, pumps, heaters, climate and pH equipment, feeders, UV and aquaAlert.	Use local Wi-Fi through the main EHEIM Digital device. Controls, programs, calibration and service actions vary by model. Check the model lookup for what appears on the Node One screen. Dosing type 14 is unsupported. No physical verification.
Seneye	Monitoring preview	Only USB Direct USB measurement	USB measurement preview, including slow PAR capture.	Monitoring only. PAR is a deliberate captured measurement, not a continuous live display or equipment-control capability. Water readings depend on the model and valid slide. Physical/production acceptance remains open.
reef-pi	Supported	By setup Network Controller network address	Sensors and equipment configured on a reef-pi controller.	Available functionality depends on what your installation exposes.
JoyReef	Model-specific	Account route Cloud Internet required	Equipment exposed by the JoyReef account integration.	Exact models remain unconfirmed. Send us your model so we can check coverage.
Fluval	Released software preview	Bluetooth; separate local Wi-Fi controller	Older FluvalSmart Bluetooth lights report power, mode and manual channel levels. The legacy LED WiFi Controller reports brightness and cloud cover over a separate local route.	Power, channel, preset, effect and program controls are not on the Node One screen yet. Check the exact model. No physical verification. FluvalConnect 4.0 and hub, pump and feeder families remain in development.

Installed smart-device routes

More than reef-brand hardware

Node One also uses mature Home Assistant device ecosystems to reach compatible plugs, sensors, relays, cameras, DIY hardware, and other equipment around the aquarium.

Ecosystem	Status	Connection	Node One Coverage	Buyer Guidance
Meross	Model-specific	Only Wi-Fi Local Wi-Fi route	Model-specific coverage for plugs, power strips, wall switches, bulbs, sensors, hubs and thermostats.	MSS305, MSS310 and MSS315 report power draw. Plugs and switches without a meter are monitor only. MSS425F is unverified. Check your exact model.
TP-Link Kasa / Tapo	Model-specific	By model Wi-FiHub Wi-Fi devices / hub accessories	Tapo P110M is verified for Matter pairing, on/off and local metering. Kasa HS300 six-outlet readings were observed on an owner's Node One.	Plugs and switches without a meter are monitor only. Tapo P304M and P316M report each outlet’s power and state. Their on/off buttons are not on the Node One screen yet. TPAP is excluded. Other features depend on the model.
Shelly	Model-specific	By model Network Wi-Fi / Ethernet devices	Compatible plugs, relays and energy meters.	Available readings and controls depend on the model.
Inkbird	Model-specific	By model BluetoothWi-Fi IBS sensors: BLE; ITC profiles: Wi-Fi	IBS-TH2, IBS-P01B, and matching ITC-306A/ITC-308 Tuya profiles.	Bluetooth sensors and Wi-Fi controllers use different routes. Match the exact model and profile.
Yieryi / RCYago	Model-specific	Only Wi-Fi Matching Tuya Wi-Fi profiles	Matching Tuya water-quality meter profiles.	Exact device firmware and profile must match.
iLonda / Tesla / Dxophiex	Model-specific	Only Wi-Fi Matching Tuya Wi-Fi profiles	Matching Tuya fish-feeder profiles.	Exact model and profile verification is recommended.
ArkNoah / Extreme	Model-specific	Only Wi-Fi Matching Tuya Wi-Fi profiles	Matching Tuya aquarium-light profiles.	Detailed scheduling remains in the manufacturer's app.
Govee	Model-specific	By model BluetoothWi-Fi Bluetooth / network routes	Devices supported by the Home Assistant Govee integrations.	Exact models govern compatibility.
SwitchBot	Model-specific	By route BluetoothCloud Bluetooth / supported cloud route	Model-specific monitoring over Bluetooth or a supported cloud route.	SwitchBot Bot shows as a switch for monitoring only. Use the SwitchBot app to press it.
YoLink	Model-specific	Via hub HubCloud YoLink radio to internet hub	Devices supported by the Home Assistant YoLink integration.	Exact models govern compatibility. Account and hub requirements apply.
Blink Mini / Mini 2K+	Released preview	Wi-Fi camera, Blink account and internet required	Released preview. Add your Blink account, see a still on the camera card and tap to watch live on Node One.	No physical verification or motion clips yet. The route uses your Blink account and internet.
Wyze	Model-specific	Account route Cloud Device / hub varies by model	Live video through Node One's own Wyze bridge. Window Cam is proven on Node One; Cam v4 is Customer Verified.	Needs your Wyze account and Wyze API key. Cam v3, Pan v2 and Pan v3 remain expected; Cam OG and Doorbell Pro are not yet supported.
Ubiquiti UniFi Protect	Model-specific	By model Network Wi-Fi / wired cameras via Protect	Supported cameras and related devices.	Requires your compatible Protect installation.
Zigbee / ZHA	Model-specific	Only Zigbee USB Zigbee dongle included	Node One includes a USB Zigbee dongle that turns it into a Zigbee network hub. Compatible Home Assistant Zigbee devices can pair directly with Node One.	No separate Zigbee hub purchase is needed for compatible devices. Exact model support and available features follow Home Assistant ZHA compatibility.
Matter	Model-specific	By device Wi-FiThreadNetwork Wi-Fi / Thread / Ethernet	Compatible accessories through the existing Matter setup route.	Supported device classes and network requirements apply.
Apple HomeKit Device	Model-specific	By device BluetoothWi-FiThread Bluetooth / IP / Thread	Compatible accessories through the existing HomeKit setup route.	Exact accessory coverage matters. Camera support must be checked separately.
ESPHome	Model-specific	By setup Network Wi-Fi / Ethernet controller	Compatible DIY controllers, sensors and devices.	Features depend on the device configuration and exposed entities.
MQTT	Model-specific	By setup Network Via configured MQTT broker	Compatible DIY controllers, sensors and devices.	Requires compatible discovery or entity configuration. The Nicrew contributor controller is not ready yet.
Tuya	Model-specific	By device CloudHub Cloud / local; hubs may apply	Compatible devices through the existing cloud route and matching local profiles.	Owner authorization and exact model/profile compatibility apply.
Network UPS Tools (NUT)	Model-specific	By setup NetworkUSB NUT server; UPS cable varies	Supported UPS equipment.	Monitoring depends on the supported UPS driver and connection.
Generic RTSP / RTSPS cameras	Model-specific	By camera Network Wi-Fi / Ethernet stream	Compatible network cameras.	Requires a supported stream URL and the owner's credentials where applicable.
Reef Trak	Supported	Account route Cloud Internet required	Verified cloud pairing and logged water-test readings, including alkalinity, calcium, magnesium, nitrate, phosphate, pH, ORP, salinity and temperature.	Reef Trak pairing and readings are verified. Linking is optional; Node One can operate without it.

Planned / under investigation

In development or not ready yet

Research and staged code are shown separately from released routes. Completed reverse engineering does not mean a Node ONE adapter is published. If one of these devices is central to your reef, contact us before ordering.

Manufacturer / Product	Status	Connection	Current Position	Buyer Guidance
Aquatlantis	Not ready yet	Candidate only Cloud Ori account / gateway route	Ori with RGBW Ultra lighting and water-temperature sensing.	Candidate route. Remaining implementation and connection limitations must be resolved.
Bluelab	Not ready yet	Candidate only Cloud Edenic account route	Edenic-connected monitoring.	Candidate monitoring route; compatibility is not yet established.
Aqueon / Coralife BlueIQ	Not ready yet	Under review Check model Exact connection unconfirmed	OptiBright SMART, Seascape SMART and SMART BioCube Jr candidates.	Candidate families, not an installed compatibility claim.
Orphek	Not ready yet	By model Check model Candidate connections under review	OR4 iCon and Atlantik V4 routes.	Model-specific routes remain under investigation.
Week Aqua	Not ready yet	Candidate only Bluetooth BLE lighting lead	BLE lighting, including the B3.0-M800Pro-18 lead.	Research evidence does not yet establish installed support.
Netlea	Not ready yet	Under review Check model Exact connection unconfirmed	Aquarium lighting.	Under investigation. Send us your exact model.
Kamoer	Not ready yet	By model Check model Separate routes under review	Modern Remote families including X1 PRO-T, F1, M1-STP, KH Carer, X2SR and Reef Master SPA remain under investigation.	Original X1, legacy X4/F4 and Mini K have separate released previews above. HYDROS-branded Kamoer pumps remain owner verified for monitoring through HYDROS.
Kessil	Not ready yet	Candidate only Network AP700 / possible Apex bridge	AP700, and a possible Apex bridge for AP9X and A360X. The older A160WE, A80 and A360 can be dimmed through DIY 0-10V hardware.	Not supported today. On a metering smart plug, Node One still gives you on/off, a schedule and an alert if the light stops drawing power.
Sicce	Not ready yet	Candidate only Network Possible Apex bridge	Syncra SDC, XStream SDC, PSK SDC, Mega Filtra SDC and the Scuba contactless heater.	Not supported today, and the possible Apex bridge is unproven. On a metering smart plug, Node One still gives you on/off, a schedule and an alert if the pump stops drawing power.
Nicrew	Not ready yet	Candidate only Network Contributor MQTT bridge	Contributor-built MQTT controller.	Contributor implementation and contract acceptance remain pending. This is not blanket Nicrew light support.
Reef Factory: local pH meter	Not ready yet	Candidate only Network Local network lead	A direct local pH meter route is still under investigation.	The released Smart Reef account monitoring preview is a separate route. See Reef Factory above.
AutoAqua	Research only	Research only Check model Connection unconfirmed	Research only.	No current compatibility promise or release date.

Don't see your device?

Send us the manufacturer and exact model. We would rather confirm compatibility before you buy than have you order a Node One that does not yet support something your aquarium depends on.

Ask About Your Device